Faucet Types
Bridge
Combining old-fashioned style with modern technology, bridge faucets hark back to a time when plumbing was simpler—minus the problems of leaking washers. Undermount sinks offer freedom to experiment with bridge faucets, which usually mount to the countertop and make cleaning the sink and countertop around the faucet easier.
Center-Set
With a spout and handle(s) in one unit, these faucets typically have double-handle controls. Most are designed to mount to a sink deck or countertop with three predrilled holes, with the outside holes spaced 4 inches from center to center. However, some have a single-post design that requires only one hole.
Single-Handle
These faucets have one spout and one handle that controls the flow of both hot and cold water. They mount to a sink deck or countertop with one predrilled hole and are easier on the joints than two-handle faucets. New sensor-controlled models allow you to start and stop the water flow and adjust the temperature without touching the faucet.
Spread-Fit
With the connection concealed below the sink deck, these faucets have a separate spout and handles. They fit holes spaced 4 to 10 inches apart and can be mounted in nonstandard configurations, such as positioning the spout on a rear corner and the handles off to one side, making it handy for tight installations.
Wall-Mount
This type of faucet attaches to the wall instead of the sink or counter. When choosing a wall-mount faucet, be sure it works with your sink, and follow the manufacturer’s specifications for the correct height and placement to minimize splashing. It’s typically suggested that the water stream be positioned just behind the sink drain.
More for You
Get Our Weekly Kitchen & Bath Ideas Newsletter
